Hi all! I’m having an issue with my pump timer. I’m attaching a picture. I set it to run every 15 minutes during the day to keep pool clean (we have a lot of trees in neighborhood). Just this season I noticed that when I would come out in the morning or afternoon, the pool would be pretty dirty and the timer dial would be moved to off instead of auto. After having monitored it throughout the day, I’ve noticed that each time it powers on during an selected time per the pins and then switches off at the end of the selected time per the selected pins, it kicks the ‘on, auto, off’ selector a little further down from ‘auto’ to completely ‘off’ to the point where it doesn’t cycle on at the next selected time. Any ideas to fix or repair without having to completely replace my swg? It’s only a few years old …
