I have an Intex 32ft X 16ft Sand Filter and Saltwater System and I feel like the pump can't circulate all the water. Also with that I have a well and that means hard water. A pool guy told me to use a calcium reducer so that my sensors won't have as much calcium build-up. However it hasn't really worked. My pool was crystal clear for the first month I had it but with the hot days it seems like I am lost on how to get it back on track.
Hard Water seems to be a problem but I only have a well
- Thread starter bcarlton9
- Start date
- May 3, 2007
- 16,904
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Welcome to the forum!
What are your current test levels (FC, PH, TA, CH, CYA) ?
Is the water cloudy?
Have you done a OCLT? Perform the Overnight FC Loss Test (OCLT) - Trouble Free Pool
Hard water can be managed with proper management of CSI. Calcium Saturation Index (CSI) - Trouble Free Pool
What are your current test levels (FC, PH, TA, CH, CYA) ?
Is the water cloudy?
Have you done a OCLT? Perform the Overnight FC Loss Test (OCLT) - Trouble Free Pool
Hard water can be managed with proper management of CSI. Calcium Saturation Index (CSI) - Trouble Free Pool
Similar threads
