Greetings & salutations! First time pool owner in a recently purchased house, and glad to have found this great resource. I've put myself through Pool School while holding down a full time job, so at least I have that going for me. Which is nice.
Anyway, opened the pool last week and received my TF-100 test kit, and so know just enough to be dangerous! I'd appreciate some feedback & suggestions to make sure I get off on the right foot. Here are my initial test results:
FC 2.0
pH 7.8
TA 130
CYA 20
CA 20 (possibly - may have done this test wrong)
My SWG reads 2,900, with the recommended level being around 3,200.
We got a ton of rain in the past week and I've had to drain a bit of water off, and the temps are still low, with water temperature being in around 63 right now. Pool looks pretty clear.
Any feedback would be really appreciated!
Anyway, opened the pool last week and received my TF-100 test kit, and so know just enough to be dangerous! I'd appreciate some feedback & suggestions to make sure I get off on the right foot. Here are my initial test results:
FC 2.0
pH 7.8
TA 130
CYA 20
CA 20 (possibly - may have done this test wrong)
My SWG reads 2,900, with the recommended level being around 3,200.
We got a ton of rain in the past week and I've had to drain a bit of water off, and the temps are still low, with water temperature being in around 63 right now. Pool looks pretty clear.
Any feedback would be really appreciated!