Folks,
I am running my pump on high 24/7 right now for aeration (reducing TA for borates). My TA has hit my target value of 70
and I have demonstrated the ability to raise PH by 0.5 in 24 hours with my homemade aerator. Here is my problem, I have a SWCG and it is cranking out chlorine! Latest test results:
TC: 13 (was 11.5, SWCG set to 45%)
CC: 0
PH: 7.0 (added MA tonight)
TA: 70
CH: 20
CYA: 40
Salt: 3500 panel
There has been no bather load whatsoever and the pool is clean. Should I simply shut off my SWCG for the time being? If so, how?
TIA
I am running my pump on high 24/7 right now for aeration (reducing TA for borates). My TA has hit my target value of 70

TC: 13 (was 11.5, SWCG set to 45%)
CC: 0
PH: 7.0 (added MA tonight)
TA: 70
CH: 20
CYA: 40
Salt: 3500 panel
There has been no bather load whatsoever and the pool is clean. Should I simply shut off my SWCG for the time being? If so, how?
TIA