Cat 2000 installed last week. Feeding acid and liquid chlorine.
also have legacy t-cell salt.
Chlorine levels are quite high with new system. We used to run 2-4 ppm. Now it’s 8-10.
temp 83F
alkalinity 120
ph 7.4
ORP set for 610. Was 620 last time I checked.
any wayto dial down the liquid chlorine feed. We’d like to rely on salt, but In the past, we had to supplement with a few litres of chlorine a week or use 2-3 pucks a week.
if I dial down the ORP set point, will it feed less chlorine?
we operate under health department rules, we need to maintain:
ph 7.2-7.8
chlorine 1-10
alk 80-120
also have legacy t-cell salt.
Chlorine levels are quite high with new system. We used to run 2-4 ppm. Now it’s 8-10.
temp 83F
alkalinity 120
ph 7.4
ORP set for 610. Was 620 last time I checked.
any wayto dial down the liquid chlorine feed. We’d like to rely on salt, but In the past, we had to supplement with a few litres of chlorine a week or use 2-3 pucks a week.
if I dial down the ORP set point, will it feed less chlorine?
we operate under health department rules, we need to maintain:
ph 7.2-7.8
chlorine 1-10
alk 80-120
