We buy chlorine in 20 litre jugs (about 5 gallons) and we use a plastic faucet that replaces the cap. These faucets start to leak after a very short period of time. Has anybody got a good idea for dispensing chlorine from a 20 litre container.
Dispensing from large chlorine jugs
- Thread starter radusa
- Start date
- Jun 13, 2017
- 450
- Pool Size
- 9600
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I used a hand siphon pump that looks like
Worked great for the chlorine and now the water temperatures are getting low, I'll rinse and use to get my test water until it's time to close.
Worked great for the chlorine and now the water temperatures are getting low, I'll rinse and use to get my test water until it's time to close.
The issue is that a lot of those faucets are made with nylon. If you want to use a faucet, make sure you get one made of polyethylene or polypropylene.
Another option would be to get an injection pump and just swap the totes out when they're empty.
Another option would be to get an injection pump and just swap the totes out when they're empty.
cfherrman
TFP Guide