Start-up was going well, except salt level was stuck 2300-2600, so cell wasn't generating. I was going by the level indicated by the SWG, which must have been malfunctioning. I was only adding salt one or two bags daily. I then added one lb of shock. Next day, the salt jumped to 4100 and the vinyl is discolored, a brackish brown color. It will not scrub off. This is the water chemistry right now:
salt - 4000
temp - 76
FC - 7
CC - 0
TC - 7
CH - 125
TA - 140
CYA - 0
pH - 8.2
Any observations or suggestions?
salt - 4000
temp - 76
FC - 7
CC - 0
TC - 7
CH - 125
TA - 140
CYA - 0
pH - 8.2
Any observations or suggestions?