Have pool features added and actuators installed and wired per the instructions but see no instructions on connecting them to my lights in features so the valves switch to set points when light is turned on? Help me please! Also it is new panel and no power to the remote antennae Have voltage at both the transformers in cabinet but no voltage at the pins from RS485 black and red wires?
Connecting the valve actuators to pool light circuit in Intellacenter control touch screen
- Thread starter Abe Abair
- Start date
- Jun 7, 2017
- 9,101
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Can you give more info like what automation system you have? It sounds like Jandy and sounds like you are connecting your light circuit into a JVA circuit (aux port). You must use an aux port that is not connected to the JVA.
