I have an ESC-36 and in my hardcopy manual from about 5 years ago, it says the minimum salt level should be 3000ppm and I run at 3500.
The online manual you can get says minimum is 4000 ppm and ideally 4500 ppm
this is on page 20 of the attached
As far as cleaning your cell, my hardcopy says 1 part acid to 3 parts water. The online manual says 1 part acid to 10 parts water but still has a diagram showing 3 to 1.
this is on page 10.
What are the correct levels based on these 2 conflicting manuals by them?
I am attaching the manual you can find online. You can download this small file here:
http://www.filedropper.com/eco-matic-installation-instructions-manual
The online manual you can get says minimum is 4000 ppm and ideally 4500 ppm
this is on page 20 of the attached
As far as cleaning your cell, my hardcopy says 1 part acid to 3 parts water. The online manual says 1 part acid to 10 parts water but still has a diagram showing 3 to 1.
this is on page 10.
What are the correct levels based on these 2 conflicting manuals by them?
I am attaching the manual you can find online. You can download this small file here:
http://www.filedropper.com/eco-matic-installation-instructions-manual