I have had my salt pool for about 8 years now. The SWG and controller is a Hayward T-Cell-15 and an Aqua Rite.
Until just recently I was on my 2nd SWC cell. The first died at age 3 years. The second started showing problems
a few weeks ago, age 5ish years (Woo Hoo !). No problems with the Aqua Rite at all.
The symptoms of the 2nd cell dieing were erratic salt readings (wildly high then low) and a lack of chlorine in the pool.
I found the CompuPool generic replacement on the web and ordered one.
http://www.poolsupplyworld.com/pool...mpupool/genericaquarite/products/3GRC40GH.htm
It turned up. I plugged it in. Salt reading matched the results from a test strip. It worked for a day.
No power LED anymore. Voltage displayed was 7 to 8 volts.
No chlorine being generated.
I got back on the web site and looked at the 'questions' tab on the site I linked above. Every question
was either 'how do I calibrate the cell?' or 'my power LED is off and the thing is dead'.
http://www.poolsupplyworld.com/pool...mpupool/genericaquarite/products/3GRC40GH.htm
I used the on-line chat feature and talked to a CS person at Pool Supply World who was very helpful.
However, she asked what revision level my controller was at. 1.33 software, 1.4 'mother board' was the answer.
Oh, she said. The generic SWG is not compatible with controller units that old. She said she would get me an RMA and
I could return the unit for only the cost of shipping and a discounted 10% restocking fee. Indeed, she got me the
RMA number. She made me feel 'special' because the restocking fee is normally 20%.
Nowhere does it say (on the web site) that the generic SWG is not compatible with older units. She didn't want to talk about that.
What about my control unit, I asked. Are you going to replace that for me ?
No, was the answer. You can't prove that was our fault.
So, I was out of pocket for the cost of return shipping, 10% of the cost and now I needed a new Aqua Rite circuit board.
Nice. That will teach me to be cheap, I thought.
I looked at the control board and sure enough, the current limiter was all scorched. So I did the next cheap thing and ordered
a new current limiter and soldered it in (just tonight). I didn't return the generic SWG.
I just finished rebuilding the control unit and got everything plugged in with the generic SWG again.
Its working and generating chlorine with correct salt readings.
I am going to monitor it very closely for the next month or so. I suspect that the 'incompatibility' story is just something that's
trotted out to folks whose power LED is now off and Pool Supply World don't want the hassle. That's why it isn't documented on
their web site. It may, or may not happen.
We will see. I am prepared to bite the bullet on this one, just to see..
I will keep everyone who is interested updated if things change..
BTW, the clear housing of the generic SWG lets you see if chlorine is being generated. Its very cool.
In general, I like the unit. Still, its only worked for a total of less than 48 hours so far !
I would be happy to answer any questions about the unit, given my brief experience with it.
Steve.
Until just recently I was on my 2nd SWC cell. The first died at age 3 years. The second started showing problems
a few weeks ago, age 5ish years (Woo Hoo !). No problems with the Aqua Rite at all.
The symptoms of the 2nd cell dieing were erratic salt readings (wildly high then low) and a lack of chlorine in the pool.
I found the CompuPool generic replacement on the web and ordered one.
http://www.poolsupplyworld.com/pool...mpupool/genericaquarite/products/3GRC40GH.htm
It turned up. I plugged it in. Salt reading matched the results from a test strip. It worked for a day.
No power LED anymore. Voltage displayed was 7 to 8 volts.
No chlorine being generated.
I got back on the web site and looked at the 'questions' tab on the site I linked above. Every question
was either 'how do I calibrate the cell?' or 'my power LED is off and the thing is dead'.
http://www.poolsupplyworld.com/pool...mpupool/genericaquarite/products/3GRC40GH.htm
I used the on-line chat feature and talked to a CS person at Pool Supply World who was very helpful.
However, she asked what revision level my controller was at. 1.33 software, 1.4 'mother board' was the answer.
Oh, she said. The generic SWG is not compatible with controller units that old. She said she would get me an RMA and
I could return the unit for only the cost of shipping and a discounted 10% restocking fee. Indeed, she got me the
RMA number. She made me feel 'special' because the restocking fee is normally 20%.
Nowhere does it say (on the web site) that the generic SWG is not compatible with older units. She didn't want to talk about that.
What about my control unit, I asked. Are you going to replace that for me ?
No, was the answer. You can't prove that was our fault.
So, I was out of pocket for the cost of return shipping, 10% of the cost and now I needed a new Aqua Rite circuit board.
Nice. That will teach me to be cheap, I thought.
I looked at the control board and sure enough, the current limiter was all scorched. So I did the next cheap thing and ordered
a new current limiter and soldered it in (just tonight). I didn't return the generic SWG.
I just finished rebuilding the control unit and got everything plugged in with the generic SWG again.
Its working and generating chlorine with correct salt readings.
I am going to monitor it very closely for the next month or so. I suspect that the 'incompatibility' story is just something that's
trotted out to folks whose power LED is now off and Pool Supply World don't want the hassle. That's why it isn't documented on
their web site. It may, or may not happen.
We will see. I am prepared to bite the bullet on this one, just to see..
I will keep everyone who is interested updated if things change..
BTW, the clear housing of the generic SWG lets you see if chlorine is being generated. Its very cool.
In general, I like the unit. Still, its only worked for a total of less than 48 hours so far !
I would be happy to answer any questions about the unit, given my brief experience with it.
Steve.