CircuPool mounting bracket????

[chezhed]

Just received a CircuPool SWG that I planned to install this weekend but I'm puzzled....Is there supposed to be a separate mounting bracket? All I have is this big controller on a plate that for the life of me, I can't figure out how it would come off to use as a mount and there aren't really any holes you can access. Couldn't find a picture of a mounting bracket online....Help...my project could be undermined to something my wife wants done

 

[rdhetrick]

Should be 4 phillips head screws, two on each side of the black mounting bracket.

Edit: I couldn't find a great picture online, but if you look at the top picture here:

http://www.compupoolproducts.com/product/salt_water-cpsc_self_cleaning.html

you can see two "tabs" on the back side of the control unit. This is where the screws/holes in the mounting plate will hold the control unit. Obviously, the other two are on the far side.

 

[chezhed]

No screws attached....but now that you say that, I looked again and what appeared to be fastened is not.....the bracket is there, just really, really tight....had to pry it off. Thanks for the guidance.

 

[rdhetrick]

I remember mine was real tight also.