i'd like to know how to calibrate a ps-8 aqua logic cell myself.
mine is off also. taylor k-1766 says 3300. cell says 2300. mult readings by cell via the diagnostic menu. mode. it also looks clean. just started pool up 4 days ago. aqua logic giving me a "very low salt" reading. i don't think the cell is on @ this low reading (?)
As far as I know, there is no way to do a true calibration. You can replace the average salt level reading with the instaneous reading by pressing the + button in the diagnostic menu but that is simply a display update.
does the aqua logic give a good reading when the water is cold? water is a balmy 57 degrees.
Mine is fairly steady from 50 degrees up to 100 degrees in water temperature and varies less than 200 ppm but it does consistantly read lower than either test strips or a drop kit but it usually isn't off by more than a 300 ppm.
ideas? goldline must be slamed on tech support...... no answer.
You can also contact them via email
if i clean the cell, do you guys know the acid /water ratio for the soak?
Manual suggests 2:1 water to acid.
It was 76 outside when i opened the pool......... it is snowing today. gotta love that Tennessee weather!