- May 29, 2018
- 451
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pureline Crystal Pure 60,000
My CH has been on the low side for the past 4/5 weeks.
Went to home depot to by calcium chloride, but all they have in stock is the 4300 dual blend icemelter.
It does not list the percent of chloride but does list two ingredients
1) Calcium Chloride
2) Calcium Chloride Hexahydrate
It this still ok to use, as I do not want to put 45 lbs into my pool if its not.
If its not, can I hold off for another month or two till they get the reg. calcium chloride in stock
temp 81
ph 8.2 (adding acid today)
FC 7.5
CC .5
CH 175
TA 120 (should drop when I bring down the ph)
CYA 40 (been 50 since pool was opened, just dropped to 40, going to retest tonight to verify its 40)
Thanks
Went to home depot to by calcium chloride, but all they have in stock is the 4300 dual blend icemelter.
It does not list the percent of chloride but does list two ingredients
1) Calcium Chloride
2) Calcium Chloride Hexahydrate
It this still ok to use, as I do not want to put 45 lbs into my pool if its not.
If its not, can I hold off for another month or two till they get the reg. calcium chloride in stock
temp 81
ph 8.2 (adding acid today)
FC 7.5
CC .5
CH 175
TA 120 (should drop when I bring down the ph)
CYA 40 (been 50 since pool was opened, just dropped to 40, going to retest tonight to verify its 40)
Thanks