- Aug 5, 2021
- 42
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I've enjoyed reading other build threads, and finally able to start my own. We broke ground last week, and digging/framing is now complete. The frames are above grade because we are raising it up so the finished deck is meeting the height of our porch/patio
Fairly straightforward design, we wanted to maximize the swimming space and we have plenty of area in the back yard to use. We plan to actually swim and don't need a lot of features. Going to add lots of landscaping in phase 2 (probably next year).
18x36 Gunite with 8 ft. deep end
7x7 spillover spa. PB says 6-9 jets will be just fine with our 3HP pump.
Wetedge Luna Quartz Montego
Travertine Ivory decking - 1400sqft total
Pentair equipment - EasyTouch w/screenlogic, sand filter, SWG
LP Heater 400k
Heat pump & Chiller
Spa spillover is the only water feature.
PB has included a Polaris automated clean with a booster pump ... but I'm not 100% on this. Might remove it.
Hitting some delays due to the tropical storm passing over today, but should be onto the rebar and gunite pretty soon!
Fairly straightforward design, we wanted to maximize the swimming space and we have plenty of area in the back yard to use. We plan to actually swim and don't need a lot of features. Going to add lots of landscaping in phase 2 (probably next year).
18x36 Gunite with 8 ft. deep end
7x7 spillover spa. PB says 6-9 jets will be just fine with our 3HP pump.
Wetedge Luna Quartz Montego
Travertine Ivory decking - 1400sqft total
Pentair equipment - EasyTouch w/screenlogic, sand filter, SWG
LP Heater 400k
Heat pump & Chiller
Spa spillover is the only water feature.
PB has included a Polaris automated clean with a booster pump ... but I'm not 100% on this. Might remove it.
Hitting some delays due to the tropical storm passing over today, but should be onto the rebar and gunite pretty soon!