Bubbles?

Pkern

Active member
May 1, 2020
29
Flower Mound, TX
Pool Size
16000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
Hello pool friends! I am getting a small number of bubbles coming out of the bottom outlet in my spa - see attached. I think that air is getting in to the plumbing somehow, but not sure about how to go about diagnosing the issue? Is this an issue? Any ideas or help would be appreciated. Thanks in advance.
 

Attachments

  • IMG_2184.jpg
    IMG_2184.jpg
    879.7 KB · Views: 5
  • IMG_2183.jpg
    IMG_2183.jpg
    706.7 KB · Views: 5
Are the bubbles riisng up from the spa drains? The link below has several good starting points to assist. We'll help further based on additional questions/answers provided. More to follow.

 
THANK YOU! Problem solved. I removed the cover on the pump, cleaned all of the surfaces and the O-ring, lubed up the O-ring, re-installed the cover and that corrected the leak. Thanks again for the help.
 
  • Like
Reactions: Texas Splash
full
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.