Thanks and greetings... My problem is that I have these milky white bubbles form when the Automatic Cover is opening across the 40 feet of the pool and end up against the liner in the deep end. I thought it was coming from the DE filter (Sta Rite System 3) grid where one was damaged. So replaced them all, as well as the spider gasket on the Mutiport valve. The cover was just replaced due to the one I bought last year, had a 10 inch opening where the material was delaminating. They replaced it with a new one so not sure if there was oil or some coating on it. On the milky bubbles it looks like parts of some chemical in the pool that hasn't fully dissolved.
Autocover and odd bubbles
- Thread starter GMSU
- Start date
- Jun 22, 2014
- 52,086
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Can you post some pics of these bubble items? Hard to imagine it being related to water chemistry, but it might be good just to be safe if you told us more about how you test your water and if you have a full set of test results. Do you add any specific chemicals to the water on a routine basis?
Can you post some pics of these bubble items? Hard to imagine it being related to water chemistry, but it might be good just to be safe if you told us more about how you test your water and if you have a full set of test results. Do you add any specific chemicals to the water on a routine basis?
- Jun 22, 2014
- 52,086
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Besides showing us some pics of the cover and bubbles, you should also update your signature. See mine as an example and the link below for assistance. It could help with replies.
www.troublefreepool.com
Create Your Signature - Further Reading
www.troublefreepool.com
Thanks for the greeting but sadly the people that came to close the pool came last friday and I don't have any good pictures of the bubbles, but I will check my phone.