If my power light is on, but no other lights are on, and my cell is good, but my system is not generating chlorine, what's the most likely problem? I have a Goldline Aquarite chlorine generator which is 9 years old. I've seen posts about zero lights on, but not with just the power light on. The pool store I go to says my salt level is fine and the panel reads 2600.
My readings are as follows:
2600
76
32.5
0.00
94p
0
AL-7
r1.33
Pool shop says the board is bad. But I've been reading about the current limiter. Should I just replace that?
My readings are as follows:
2600
76
32.5
0.00
94p
0
AL-7
r1.33
Pool shop says the board is bad. But I've been reading about the current limiter. Should I just replace that?