Aqua Rite salt chlorine generator

[KP1]

My generator display was blinking check salt and inspect cell. The salt was 2800 ppm and I cleaned the cell. Now when I turn it on, it reads "0" and the power and generating light doesn't come on. Please advise. Thanks in advance.

 

[Rancho Cost-a-Lotta]

I don't know much about the Hayward unit, but I know there is a fuse. Check out the wiki article on your SWG. This link should take you to the section on the fuse. If that doesn't work, see if there's anything else in the article that may help.

Hayward Aquarite SWG - Further Reading

www.troublefreepool.com

 

[C0d3Sp4c3]

Inspect the Thermistor.

 

[KP1]

You are exactly right! I forgot how much trouble those things were. My replacement came loose. Thank you very much!

 

[KP1]

I don't know much about the Hayward unit, but I know there is a fuse. Check out the wiki article on your SWG. This link should take you to the section on the fuse. If that doesn't work, see if there's anything else in the article that may help.

Hayward Aquarite SWG - Further Reading

www.troublefreepool.com

Thank you for the reminder, it was actually the thermistor. The fuse was good but the thermistor had come unsoldered.