Hello. New to the site. We've been having trouble getting our FC up after having our pool pump motor go out. Full sun in Phoenix AZ! Water turned green. Back and forth to the pool store, spending hundreds of dollars on shock, conditioner, more shock, algeacide,phosphate remover, pucks, etc etc. Got the green cleared up but water is cloudy. We set up a signature line which i dont see but hope it will show up with this post.
Bought a decent test kit at Leslie Pools last night (Leslie's total pool care DPD Test kit 18-576) and here are our results:
TC - 0
FC - 0
CC - 0
BR - 1
PH 7.2
TA 110
CH 500+ (off the chart)
CYA at 30 (top of test tube) could still see the black dot so assume we are below 30.
On recommendation from pool store we added a 2nd puck dispenser to the pool since our FC levels were staying so low. That may be why the CH is so high? We have like 8 pucks floating in there right now.
Bought a decent test kit at Leslie Pools last night (Leslie's total pool care DPD Test kit 18-576) and here are our results:
TC - 0
FC - 0
CC - 0
BR - 1
PH 7.2
TA 110
CH 500+ (off the chart)
CYA at 30 (top of test tube) could still see the black dot so assume we are below 30.
On recommendation from pool store we added a 2nd puck dispenser to the pool since our FC levels were staying so low. That may be why the CH is so high? We have like 8 pucks floating in there right now.
Last edited: