Hello I just finished converting my pool from baquacil to SWG. I got through it ok thanks to the help of your site. I only made one mistake. I tested the PH in the middle of it. Of course it was extremely high so added some muriatic acid. The conversion is now done everything looks great except my PH is so low the test just comes back a bright yellow and my TA is so low when I add the indicator to the sample it turns red instead of green. I'm using a Taylor k-2006 test kit. I've added almost a box of borax and it doesn't seem to be changing any. Is there something else I should be doing? Or just keep adding borax?
other numbers
FC: 1 just hooked the SWG up last night and I was afraid to boost it until I saw what it did because I already had some chlorine in it. So, I will boost that to increase this
CH: 80 adding increaser
CYA:30 been adding this so I will put a little more in.
other numbers
FC: 1 just hooked the SWG up last night and I was afraid to boost it until I saw what it did because I already had some chlorine in it. So, I will boost that to increase this
CH: 80 adding increaser
CYA:30 been adding this so I will put a little more in.