I am considering installing 2-4 pentair deck jets around my pool deck, I wanted to see some real pictures of the jets in action, all I could find was manufacturer pics.
This was my plan on the plumbing any input would be apprieciated, I have read most of the post on head presure etc. but am somewhat still confused.
Can I simply put a Valve in between my return outlets and the deck jets to control pressure?, I have a 2hp motor with 2 returns, 2 inch plumbing, that are approx 50' from the pump. I estimate that the furthest jet away would 100' and would plumb in up to 4 deck jets in line if my plumbing can handle it, they require 3/4" pvc and require 3-5 gpm/ 4-8 ft of head for 3-7 ft. Should I start out the plumbing for the jets coming from the pump with 1 or 1 1/2" pvc and then drop to 3/4"?
I have really tried to figure the feet of head for my plumbing now but am confused :?
Thanks in advance
This was my plan on the plumbing any input would be apprieciated, I have read most of the post on head presure etc. but am somewhat still confused.
Can I simply put a Valve in between my return outlets and the deck jets to control pressure?, I have a 2hp motor with 2 returns, 2 inch plumbing, that are approx 50' from the pump. I estimate that the furthest jet away would 100' and would plumb in up to 4 deck jets in line if my plumbing can handle it, they require 3/4" pvc and require 3-5 gpm/ 4-8 ft of head for 3-7 ft. Should I start out the plumbing for the jets coming from the pump with 1 or 1 1/2" pvc and then drop to 3/4"?
I have really tried to figure the feet of head for my plumbing now but am confused :?
Thanks in advance