As the title says we are building a pool with a new Intelliflo filter pump and a 2 speed waterfall booster pump (no spa), both being hooked up to an Easytouch 8 system with the built in SCG.
I know that you hook the Intelliflo straight to a breaker and the data cable to the easytouch com port and the SCG to the filter relay, but how do I hook up the additional 2 speed superflo waterfall pump to be able to control the speeds? My specific questions are:
Thanks
I know that you hook the Intelliflo straight to a breaker and the data cable to the easytouch com port and the SCG to the filter relay, but how do I hook up the additional 2 speed superflo waterfall pump to be able to control the speeds? My specific questions are:
- Do I use the Pentair 2 speed relay (#520198) that is available to hook up the 2 speed pump?
- If yes on #1 above, where do I hook in the 2 speed relay data cable - to the 2 spd connector or to another auxiliary connector on the easytouch board? The instructions seem to indicate that the 2 speed connector on the easytouch board is for the filter pump, but can it be used for a secondary pump?
Thanks