I know there are dozens of threads on the topic. We have a new pool and started pristine blue about 3 weeks ago and then found this site. I am quite sure we made a mistake. So.... how to get it back to a chorine based pool (without eyes burning and all that).
24 round above ground
Last store reading:
Free available chlorine was .05
Total chlorine was .25
Combined: .2
PH 8 (I just put in the PH reducer so I will read that later today)
Total alkalinity (input) 90
Total alkalinity (adjusted) 79
Calcium hardness 199
Cyanuric acid 33
Copper .6
Iron .3
Maganese 0
nitrates 0
total dissolved solids 0
phosphates 0
saturation index .5
Have a lot of reading to do, but what to do to get it to a sanitizer based system? ;?
24 round above ground
Last store reading:
Free available chlorine was .05
Total chlorine was .25
Combined: .2
PH 8 (I just put in the PH reducer so I will read that later today)
Total alkalinity (input) 90
Total alkalinity (adjusted) 79
Calcium hardness 199
Cyanuric acid 33
Copper .6
Iron .3
Maganese 0
nitrates 0
total dissolved solids 0
phosphates 0
saturation index .5
Have a lot of reading to do, but what to do to get it to a sanitizer based system? ;?