I've read multiple threads here about issues with salt and temp indicators on these units. I inherited my Compupool SWG with the pool when I bought the house. It worked great for me last year and up until now this year. Yesterday it gave me a low salt indicator, we've had alot of rain so I figured this was reasonable, so i dumped a bag of salt into the pool. After a couple of hours I looked and it was still registering <2500ppm salt (the manual for this unit says it needs to be at 3500). So, stupidly I might add, instead of coming out here and reading I set about taking the cell off to clean it thinking this might be the issue. Well I managed to hose up the cell housing during this process, so that is going to need to be replaced. Needless to say, cleaning the cell did not fix my issue and now I have a leak to boot. At this point in the process I decide to visit tfp.com to see if any of you guys have had similar issues. From what I'm reading it would seem that maybe I need to muck about with the calibration on the unit? What I'm curious about is has this worked for folks long term or is this the beginning of the end for this unit? I don't want to invest money replacing a cell housing when I might be replacing the entire unit within the year.