Since yesterday nov 9 at 3 pm i have been adding pool shock (calcium hypochloride) to my pool water. to keep the water at shock level. today i added 3 gallons of regular bleach over a period of 7 hrs now the green seems to be gone but the water is milky white. i cleaned the cartrige filter
and brushed the pool twice today while adding the chemicals.
i posted this similar post earlier but i didnt get a response so i went to look for the post and i cant find it on the site so if this is a duplicate please forgive my error.
i use HTH teststrips these are the last numbers
tot hardness th 100
fc seemed to be 0 so i just added 1 .5 gal of bleach now the number is 10 it also gives a reading for bromine that number is 20
ph between 7.2 -7.5
ta 120
cya aproximatly 20
i am so confused .
did i do something wrong?
why is it milky?
someone please help
thanks so much tom
and brushed the pool twice today while adding the chemicals.
i posted this similar post earlier but i didnt get a response so i went to look for the post and i cant find it on the site so if this is a duplicate please forgive my error.
i use HTH teststrips these are the last numbers
tot hardness th 100
fc seemed to be 0 so i just added 1 .5 gal of bleach now the number is 10 it also gives a reading for bromine that number is 20
ph between 7.2 -7.5
ta 120
cya aproximatly 20
i am so confused .
did i do something wrong?
why is it milky?
someone please help
thanks so much tom