I just got my pool up and running this week and did a first test that went as follows:
FC= 0
PH= 7.5
TA= 70
CYA= 0
Used pool pal to adjust the chlorine to a shock level of 10.....added 256 oz of liquid stabilizer to obtain cya levels of 40ppm added baking soda and borax to adjust TA and PH...that was last night.
Tested tonight and my FC level is still up there @ as far as I can tell....my kit only goes up to 5 and its pretty yellow....everything else looks ok except the CYA....according to my tube test its @ 90-100 ppm.
My question is , my test kit spent the winter in the garage and got very cold, could that affect my initial readings and did I overdose on liquid CYA ?? Pool had a little gunk in the bottom , so i brushed it and left the filter on for 24+ hrs and its pretty clear....not perfect but getting there.
this is my first full season using the BBB method as I had the pool installed at the end of last july and my water was perfect.
Any help is appreciated.
FC= 0
PH= 7.5
TA= 70
CYA= 0
Used pool pal to adjust the chlorine to a shock level of 10.....added 256 oz of liquid stabilizer to obtain cya levels of 40ppm added baking soda and borax to adjust TA and PH...that was last night.
Tested tonight and my FC level is still up there @ as far as I can tell....my kit only goes up to 5 and its pretty yellow....everything else looks ok except the CYA....according to my tube test its @ 90-100 ppm.
My question is , my test kit spent the winter in the garage and got very cold, could that affect my initial readings and did I overdose on liquid CYA ?? Pool had a little gunk in the bottom , so i brushed it and left the filter on for 24+ hrs and its pretty clear....not perfect but getting there.
this is my first full season using the BBB method as I had the pool installed at the end of last july and my water was perfect.
Any help is appreciated.