Would much appreciate some input. I've recently noticed my Kreep Krauly is remaining afloat and off-kilter rather than staying suctioned to the plaster. Usually it moves around alright, but today, it's slowed down quite a bit, as well as staying afloat...
I've taken some pictures and a short clip to show the condition of the Kreepy -- it's only ~2 years old. The pool is 25,000 gallons, DE filter with solar panels. Pressure seems fine, ~5-10 psi when bypassing roof panels, ~15 if going through panels. Attached to 3' hoses to the skimmer with a regulator valve with 3 weights as suggested by the manufacturer -- ~5 inches, ~5-6 feet, and ~10 feet.
I don't see anything cracked, and the flapper/hammer seems to be moving fine inside the body, nor debris caught in the body...
Youtube video/pictures
Any tips appreciated!
I've taken some pictures and a short clip to show the condition of the Kreepy -- it's only ~2 years old. The pool is 25,000 gallons, DE filter with solar panels. Pressure seems fine, ~5-10 psi when bypassing roof panels, ~15 if going through panels. Attached to 3' hoses to the skimmer with a regulator valve with 3 weights as suggested by the manufacturer -- ~5 inches, ~5-6 feet, and ~10 feet.
I don't see anything cracked, and the flapper/hammer seems to be moving fine inside the body, nor debris caught in the body...
Youtube video/pictures
Any tips appreciated!