I've been using the TFP Taylor test kit since we've had our pool, about 5 months. I think I've managed the levels fairly well but now I need some guidance. We had a huge pool party 4 days ago then a torrential rainstorm last night and my FC is down to 1. I increased the salt percentage to 55% and the pump runs from 8-5. I just turned on the Super Chlorinate to run for 24 hrs. Do I need to manually add chlorine? I have some pucks the PB left behind. The pool is looking a little green but I'm thinking that's because of the rainwater.
Second issue is salt levels. It has been dwindling over the last month and is now 2310. Looking at this chart https://www.hayward-pool.com/pdf/manuals/Salt&SwimChemistryGuide.pdf it says I should add about 150 lbs of salt. That seems so high. Should I start with a bag or two?
Other numbers from testing today:
CYA 80
TA 90
pH 7.8
CH 275
Second issue is salt levels. It has been dwindling over the last month and is now 2310. Looking at this chart https://www.hayward-pool.com/pdf/manuals/Salt&SwimChemistryGuide.pdf it says I should add about 150 lbs of salt. That seems so high. Should I start with a bag or two?
Other numbers from testing today:
CYA 80
TA 90
pH 7.8
CH 275