I just received my TF-100 kit and have my first results.
FC greater than 5 Range only goes to 5 and it is slightly more yellow than 5. I'm guessing 6?
PH 6.8
TA 120
CH 250
CYA 40
CH Drop 7.5
CC 0
TC greater than 5
I plugged everything into pool math but I'm not sure where to go from here.
Pool math has a Borate section and says it may affect the ph?
I don't see it covered in my test kit?
My pool water is crystal clear and fine for swimming, no complaints so far.
It appears everything is within acceptable norms except the ph is too low and chlorine is a bit high. I know the chlorine will come down on it's own but I'd like to correct the PH. I just don't want to start pouring stuff into the pool until I am sure what "stuff" and how much should be going in.
Currently, I am using the following to maintain the pool:
3" Aqua Chem brand Trichloro pucks in a floater
Aqua Chem brand Shock plus active ingredients are Sodium dichloro-s-triazinetrione 58.2% and 41.8% other ingredients
This is only my second year with this pool and my first full season. The guy I bought the house from was a chemical engineer and I got the idea that "adjusting" the various chemicals in the pool was a long time hobby of his. In my pool shed, I have a wide array of algaecides, PH modifiers, flocculent and assorted pool chemicals that came with the home.
I have about 1/3rd of a case of the shock and 1/3rd of a 5 gallon bucket of the pucks on hand right now. I also have approximately 2.5#'s of hth brand, ph plus which has an active ingredient of 98% Sodium Carbonate.
My thoughts are to raise the ph with the Sodium Carbonate I already have and continue to use the current pucks and shock until the CYA rose to near 50.
Once I've depleted my current supplies, or the cya hits 50, I plan to follow the trouble free pool method.
I'd appreciate your thoughts on my test results and plans. Should I just switch over now and keep these left over chemicals on the shelf?
FC greater than 5 Range only goes to 5 and it is slightly more yellow than 5. I'm guessing 6?
PH 6.8
TA 120
CH 250
CYA 40
CH Drop 7.5
CC 0
TC greater than 5
I plugged everything into pool math but I'm not sure where to go from here.
Pool math has a Borate section and says it may affect the ph?
I don't see it covered in my test kit?
My pool water is crystal clear and fine for swimming, no complaints so far.
It appears everything is within acceptable norms except the ph is too low and chlorine is a bit high. I know the chlorine will come down on it's own but I'd like to correct the PH. I just don't want to start pouring stuff into the pool until I am sure what "stuff" and how much should be going in.
Currently, I am using the following to maintain the pool:
3" Aqua Chem brand Trichloro pucks in a floater
Aqua Chem brand Shock plus active ingredients are Sodium dichloro-s-triazinetrione 58.2% and 41.8% other ingredients
This is only my second year with this pool and my first full season. The guy I bought the house from was a chemical engineer and I got the idea that "adjusting" the various chemicals in the pool was a long time hobby of his. In my pool shed, I have a wide array of algaecides, PH modifiers, flocculent and assorted pool chemicals that came with the home.
I have about 1/3rd of a case of the shock and 1/3rd of a 5 gallon bucket of the pucks on hand right now. I also have approximately 2.5#'s of hth brand, ph plus which has an active ingredient of 98% Sodium Carbonate.
My thoughts are to raise the ph with the Sodium Carbonate I already have and continue to use the current pucks and shock until the CYA rose to near 50.
Once I've depleted my current supplies, or the cya hits 50, I plan to follow the trouble free pool method.
I'd appreciate your thoughts on my test results and plans. Should I just switch over now and keep these left over chemicals on the shelf?