Pool looks awesome now that the TA and pH are in an acceptable level. I have one more issue now that I cannot turn up any info on. The previous owners neglected the pool to the point of allowing an algae/scum line to form around the deeper end of the pool under an overhanging oak (that I have since butchered back). It stained the fiberglass gelcoat a light green. At first I thought it was algae, but it does not brush off, and it is perfect line about 2 -3 inches below where I like to keep my water level. Shock did not affect it when I iitially shocked the pool. Is there a way to remove the stain?
My numbers are
FC: 4-7
CC: consistently 0
pH: 7.4 (I am bringing it up to 7.8...it has remained constant since lowering the TA)
TA: 80
CH: 280
CYA: 50
Numbers come from a TF test kit.
One more question: Are all spa lights universal as far as fitting in an underground niche? I have a spa sized niche that accepts a SAL (I called Pentair) but I need to know if a Hayward colorlogic will fit in there too.
Thanks!
My numbers are
FC: 4-7
CC: consistently 0
pH: 7.4 (I am bringing it up to 7.8...it has remained constant since lowering the TA)
TA: 80
CH: 280
CYA: 50
Numbers come from a TF test kit.
One more question: Are all spa lights universal as far as fitting in an underground niche? I have a spa sized niche that accepts a SAL (I called Pentair) but I need to know if a Hayward colorlogic will fit in there too.
Thanks!