Once you bring your new 120 volt line into the motor it is simply a matter of changing the brown wire from the "A" terminal onto the "B" terminal and the White wire from the "B" terminal onto the L2 terminal. The hot (black) wire will go onto the L1 terminal and the neutral (white) onto the L2 terminal
Well, it looks like you need to move the pump Brown from A to B and move the pump white from B to L2.
Then I think you put your white (neutral) on L2 also with your black (+115V) to L1.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!