This should probably be listed under dumb questions, but here goes. I am in the process of slamming after opening the swamp for spring. last summer we switched to SWG when new liner was installed. Until the TF-100 arrives I'm guessing how much of my chlorine reading is good chlorine. I have now learned I should be using liquid chlorine instead of leftover granule chlorine from before SWG. My question is --- if I dissolve the granules completely in a bucket before adding to the pool is that basically the same as adding "Clorox" liquid. (Apart from the different chemical makeup of course.) I would like to finish off the bucket I have, plus figure out what to do with the small bucket of 3" tabs. If it would be better to use liquid bleach I do have another use for old stuff instead of pool. Dissolving it first is timing consuming, but hey I'm retired-- so what else do I have to do 63 and still learning !!