I bought a new Hayward Aquabug. It worked one time, now it just makes a beeline for the corner and sits there and sulks.
Thought it was the pump pressure - it was running about 5. But after clearing my outflow strainer the pump is back running at 10psi and still the aquabug does nothing but sulk in the corner.
Any ideas? I have a good pump, no air in the strainer, leaf canister is clear, ring on the aquabug spins freely.
Thought it was the pump pressure - it was running about 5. But after clearing my outflow strainer the pump is back running at 10psi and still the aquabug does nothing but sulk in the corner.
Any ideas? I have a good pump, no air in the strainer, leaf canister is clear, ring on the aquabug spins freely.