Hello,
I have a Suntouch 520819, a single relay connected to a 1 hp single speed pump, 6 roof mounted Heliocol solar panels with automated solar valve and a 10,000 gallon in ground pool.
I want to program the controller for 2 functions:
1. Turn on the pump (filter) from 2:00 pm to 6:00 pm, regardless of solar conditions,. Solar would be on when available, off when not.
2. Turn on the pump and solar on from 8:00 am to 8:00 pm if solar is available and turn off the pump and solar when solar is not available.
Obviously, program 1 will override program 2, which is fine. Is this possible?
Thank you for your help!
Robert
I have a Suntouch 520819, a single relay connected to a 1 hp single speed pump, 6 roof mounted Heliocol solar panels with automated solar valve and a 10,000 gallon in ground pool.
I want to program the controller for 2 functions:
1. Turn on the pump (filter) from 2:00 pm to 6:00 pm, regardless of solar conditions,. Solar would be on when available, off when not.
2. Turn on the pump and solar on from 8:00 am to 8:00 pm if solar is available and turn off the pump and solar when solar is not available.
Obviously, program 1 will override program 2, which is fine. Is this possible?
Thank you for your help!
Robert