Building a new pool with lots of plumbing due to size and in-floor cleaner, and wondering what typical pressure leakdown during test is. Plumber pressurized to 20psi Thursday afternoon, 48 hours later one pump/cleaner set is down to 10psi, the other is at 16psi. 3 Pentair valves on the lower set, 2 on the higher, 2 Paramount cleaner valves on the higher psi side, 1 on the lower, an Intelliflo pump and a C&C+420 on each set.
Does this seem like normal levels of leakdown?
thanks,
Vince
Does this seem like normal levels of leakdown?
thanks,
Vince