So I have an issue coming up with our electrical for our pool. I have until May to work on this, so plenty of time, right?
Our original pump was a sequel II, 0-1651-000. Some of the plastic parts were breaking off, so I brought it in for repairs at the end of the season. We have used the pump through 10 summers.
The pool company said that the motor needed about $150 in repairs. I opted to buy a new pump. I chose a twist lock plug, but the pool guy said that the twist lock I had on my old pump was different than the one on this pump, a White River 1 hp.
I checked it out, and sure enough, the prong with the extra little "arm" on it is on the opposite side of the arm on my plug.
How hard is it to swap out the face plate? Would I need and electrician for that?
Thanks in advance. Off to make a signature...
Our original pump was a sequel II, 0-1651-000. Some of the plastic parts were breaking off, so I brought it in for repairs at the end of the season. We have used the pump through 10 summers.
The pool company said that the motor needed about $150 in repairs. I opted to buy a new pump. I chose a twist lock plug, but the pool guy said that the twist lock I had on my old pump was different than the one on this pump, a White River 1 hp.
I checked it out, and sure enough, the prong with the extra little "arm" on it is on the opposite side of the arm on my plug.
How hard is it to swap out the face plate? Would I need and electrician for that?
Thanks in advance. Off to make a signature...