We have an agp and I bought a winter cover that I thought would work. I've seriously tried everything to get it to stay put. We have a pillow that will not stay where it belongs, and after fighting the cable to put the cover on originally I wasn't about to take it off again so I pushed the pillow back out towards the middle and threw some floaties in too. That's a minor problem, we have no wind break so the cover looks like more of a dome than a cover most of the time. We have the cable as tight as we can get it, I had cover clips that just blow off, we used shrink wrap, that's all bunched up in a wad under the edge of the cover, and I went around and clipped all my woodworking clips around the edge to try and help hold it against the wind. NOTHING is working. How do I keep the cover from getting completely trashed (cause let's face it they aren't super cheap) and keep the stupid thing in place?!!
I'm afraid the wind will just toss water bags around too, so I'm at a loss. We are in a hard freeze zone and should see snow in the next couple of weeks.
My next step is to order the industrial shrink wrap and wrap the pool top to bottom to try and keep the wind out of it.
I'm afraid the wind will just toss water bags around too, so I'm at a loss. We are in a hard freeze zone and should see snow in the next couple of weeks.
My next step is to order the industrial shrink wrap and wrap the pool top to bottom to try and keep the wind out of it.