Hi
My pool is an overflow type and the vacuum port is about 4 inch below the water line. Recently I noticed a loss of suction, I have checked all the seals and they seam OK. The pressure was at 1 bar, I did a backwash and now it is at .5 bar. The suction is still low. Originally I would have difficulty removing the hose when the motor was running, now no problem.
Any suggestions please.
Thanks in advance
My pool is an overflow type and the vacuum port is about 4 inch below the water line. Recently I noticed a loss of suction, I have checked all the seals and they seam OK. The pressure was at 1 bar, I did a backwash and now it is at .5 bar. The suction is still low. Originally I would have difficulty removing the hose when the motor was running, now no problem.
Any suggestions please.
Thanks in advance