- Aug 30, 2012
- 2
Installed in 2007. Replaced Tcell15 this spring. Last week received "No cell power" and performed circuit board solder fix....all OK after that. Today the chlorine level was very low so I manually turned on the pump and verified generation (plastic hose directly from discharge jet). Ran errands for a few hours and came home to the message "Chlorinator off". Diagnostic menu showed 0 V and 0 A, but I cannot remember temp and salt level displayed.
Turned off pump and restarted. Running OK for the last hour...Diagnostic menu indicates -26.6V -7.56A 88/89 degrees temp and 3100 ppm (almost identical readings on the + polarity).
What would cause the chlorinator to turn off and display the "Chlorinator off" message? Would a cell temperature of 90 degrees do it?
Thank you in advance.
Wayne
Turned off pump and restarted. Running OK for the last hour...Diagnostic menu indicates -26.6V -7.56A 88/89 degrees temp and 3100 ppm (almost identical readings on the + polarity).
What would cause the chlorinator to turn off and display the "Chlorinator off" message? Would a cell temperature of 90 degrees do it?
Thank you in advance.
Wayne