Apologies rookie here. I have just raised a used 24' round Vogue ABG pool and have discovered that a cove piece came out during the filling process. The pool is all full and the liner has stretched around this 3 inch half moon locking piece. I would hate to empty the pool as our season is already short here in MN.
So besides this obvious route, would anyone recommend either of the last these two options
1. Let it go and hope no one stubs their toe on this and the liner can put up with this strain for a year or two.
2. Put on my goggles and attempt and underwater repair. Cut the liner, quickly relocate piece back into place and then put a patch on the vinyl. I have repaired leaks underwater before.
This pool is v3.0 in my limited pool experience.
-Steve
So besides this obvious route, would anyone recommend either of the last these two options
1. Let it go and hope no one stubs their toe on this and the liner can put up with this strain for a year or two.
2. Put on my goggles and attempt and underwater repair. Cut the liner, quickly relocate piece back into place and then put a patch on the vinyl. I have repaired leaks underwater before.
This pool is v3.0 in my limited pool experience.
-Steve