The Salt level in my pool is at 3500 (tested by several pool stores). When I recalibrate my salt level through the automatic chlorinator to match this, I can generate chlorine but my salt level slowly drops until it goes below 2700 and then stops producing chlorine. My cell is about 6 years old and I have cleaned it a couple of times but I still can't get the salt level to sustain a correct reading for more than 12 hours. I've also noticed that my cell voltage is at 27.1 while producing chlorine but the current continually drops and then settles below 1 (currently 0.83).
Is it time to replace my cell or is something else going on?
Maybe a bad component on the board?
Any help would be appreciated.
Is it time to replace my cell or is something else going on?
Maybe a bad component on the board?
Any help would be appreciated.