I posted this in my introduction thread, but I realize it probably should've been here instead.
Here is my first set of numbers:
PH 7.6-7.7
FC 8
CC 0
CH 425
TA 70
CYA 50
Those were at noon yesterday. Last night at around 10pm I checked the PH and FC again and got 7.8 and 7.5 respectively. I had turned the SWG down a bit when I got the FC of 8 yesterday.
The SWG has 5 plates in it, so I believe that makes it a Resilience A5 which is rated for a pool up to 40K gallons. The pump does not have a timer on it, so it runs 24/7. I will put a stop to that as soon as I have a chance to wire in a timer. One thing I am wondering about is the mineral pack that they were using. I took it out when we took possession of the house. It has a center core that dispenses tri-chlor. The outer pack says it has silver chloride and something else. I can't remember what it was. I didn't see anything about copper on it, so hopefully that means I don't have copper in the pool. I'm gonna see if a local pool store can check the salt and metal content for me. I'm also planning on adding a little CYA, and some acid to keep the PH in check. How does everything else look?
Sent from my iPhone using Tapatalk
Here is my first set of numbers:
PH 7.6-7.7
FC 8
CC 0
CH 425
TA 70
CYA 50
Those were at noon yesterday. Last night at around 10pm I checked the PH and FC again and got 7.8 and 7.5 respectively. I had turned the SWG down a bit when I got the FC of 8 yesterday.
The SWG has 5 plates in it, so I believe that makes it a Resilience A5 which is rated for a pool up to 40K gallons. The pump does not have a timer on it, so it runs 24/7. I will put a stop to that as soon as I have a chance to wire in a timer. One thing I am wondering about is the mineral pack that they were using. I took it out when we took possession of the house. It has a center core that dispenses tri-chlor. The outer pack says it has silver chloride and something else. I can't remember what it was. I didn't see anything about copper on it, so hopefully that means I don't have copper in the pool. I'm gonna see if a local pool store can check the salt and metal content for me. I'm also planning on adding a little CYA, and some acid to keep the PH in check. How does everything else look?
Sent from my iPhone using Tapatalk