Not sure if I have a problem or not, but my MA consumption seems high to me.
Numbers from memory. TF-100
FC 6.0
CC 0.0
TA 80
CH 230
PH 7.8+ Having to dose with approximately 12oz MA daily to get to 7.5
CYA 70
The pool get full sun all day. I had to remove the only shade the pool was getting. Mesquite tree gumming up the pump way too many times.
The only aeration is from the SWG, all return jets are pointed down. The pool gets used by 1 - 2 adults for about 1 to 2 hours a day.
I know that new plaster can effect pH rise.
Is this normal?
What adjustments if any should I make?
I am considering an acid pump. Any suggested sources?
Thanks for the help. I have learned a lot from this site.
Numbers from memory. TF-100
FC 6.0
CC 0.0
TA 80
CH 230
PH 7.8+ Having to dose with approximately 12oz MA daily to get to 7.5
CYA 70
The pool get full sun all day. I had to remove the only shade the pool was getting. Mesquite tree gumming up the pump way too many times.
The only aeration is from the SWG, all return jets are pointed down. The pool gets used by 1 - 2 adults for about 1 to 2 hours a day.
I know that new plaster can effect pH rise.
Is this normal?
What adjustments if any should I make?
I am considering an acid pump. Any suggested sources?
Thanks for the help. I have learned a lot from this site.