Hey all,
Had a plaster pop patched and during the process the pool was drained then refilled. I took the initial test, fired up the pump and added d.e. to it. Numbers are as follows:
FC: 0
TA: 60 ppm
Ch: 80 ppm
PH: 7.4
I didnt have any chemical to test for CYA. Is it safe to assume the water has 0 cya in it? I dosed the pool to bring the fc up to shock level for 0 CYA and am going to started adding it via the recommended shock levels.
I do have an algae bloom but am prepared to combat it with POP
Suggestions on what to do next as far as numbers or anything else?
Had a plaster pop patched and during the process the pool was drained then refilled. I took the initial test, fired up the pump and added d.e. to it. Numbers are as follows:
FC: 0
TA: 60 ppm
Ch: 80 ppm
PH: 7.4
I didnt have any chemical to test for CYA. Is it safe to assume the water has 0 cya in it? I dosed the pool to bring the fc up to shock level for 0 CYA and am going to started adding it via the recommended shock levels.
I do have an algae bloom but am prepared to combat it with POP
Suggestions on what to do next as far as numbers or anything else?