- Apr 27, 2013
- 4
- Pool Size
- 28000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
FC 16
CC <0.5
pH 7.3
TA 50
CH 100
CYA 40 -50
I have been in SLAM mode for 14 days. pH was super high (8+) before beginning SLAM. Used Pool Math to calculate muratic acid to bring it within range, but it apparently dropped the bottom out! At this point I have a (white) cloudy pool that seems to be making barely perceptible progress. Wonder if I should try to raise the pH or just keep on keeping on with what I am doing? Any advice would be appreciated. I have fought my way from here to clear before, but would really like to do it the most efficient way!
CC <0.5
pH 7.3
TA 50
CH 100
CYA 40 -50
I have been in SLAM mode for 14 days. pH was super high (8+) before beginning SLAM. Used Pool Math to calculate muratic acid to bring it within range, but it apparently dropped the bottom out! At this point I have a (white) cloudy pool that seems to be making barely perceptible progress. Wonder if I should try to raise the pH or just keep on keeping on with what I am doing? Any advice would be appreciated. I have fought my way from here to clear before, but would really like to do it the most efficient way!