Hello,
First time pool for our family, and we bought the intex 18x9x52.
So, here is the question...
After leveling (so I thought) in the hot GA sun and hard red clay... we filled the pool only to find it out of level by 2.5" at the most out of level spot. It seems we have a high corner which has shifted water to the opposite diagonal corner. We used sod cutter and removed the sod, used long 2x4s and 6' level... tamped the whole area then added about 1/4 of sand and tamped/smoothed out.... level showed level and looked real level, so thought we were good. Put down the tarp then gorilla pad, last the pool and set up and filled.
Water Depth:
Low corner is 44”
Opposite same short side 42 3/8
Opposite same long side 42 ½
Opposite diagonal 41 ½
Do y'all think this will be okay to swim in?
Seems all the corners and rails are moving smoothly as they should, and none of the support legs looked stressed.
Your input is greatly appreciated....
Thank you
[/url][/IMG]
[/url][/IMG]
First time pool for our family, and we bought the intex 18x9x52.
So, here is the question...
After leveling (so I thought) in the hot GA sun and hard red clay... we filled the pool only to find it out of level by 2.5" at the most out of level spot. It seems we have a high corner which has shifted water to the opposite diagonal corner. We used sod cutter and removed the sod, used long 2x4s and 6' level... tamped the whole area then added about 1/4 of sand and tamped/smoothed out.... level showed level and looked real level, so thought we were good. Put down the tarp then gorilla pad, last the pool and set up and filled.
Water Depth:
Low corner is 44”
Opposite same short side 42 3/8
Opposite same long side 42 ½
Opposite diagonal 41 ½
Do y'all think this will be okay to swim in?
Seems all the corners and rails are moving smoothly as they should, and none of the support legs looked stressed.
Your input is greatly appreciated....
Thank you