Hi, I'm new to the forum, and new pool owner, and just opened my pool. I have a TF-100 kit and ran my first tests.
Equipment:
Pentair Easytouch
Pentair Intellichem
Pentair IH-40 SWG
Pentair Clean and Clear Plus Cartridge filter
13,000 Gallon pool
FC 3.5
CC 0
pH 7.4
TA 70
CYA 30
CH 1300 I have tested this 3 times with the same results.
Salt 4200
TDS 6800 (from pool store)
My question is is this correct? Is there anyway to verify? Suggestions? The fill water they have to use here is well water trucked in because of drought conditions. The ground water here is known for its hardness. The water is beautiful, the CSI stays around -.09 on the intellichem, and I have to add about 12-16 oz a day of acid.
Thanks
Edited: for Salt and TDS
Equipment:
Pentair Easytouch
Pentair Intellichem
Pentair IH-40 SWG
Pentair Clean and Clear Plus Cartridge filter
13,000 Gallon pool
FC 3.5
CC 0
pH 7.4
TA 70
CYA 30
CH 1300 I have tested this 3 times with the same results.
Salt 4200
TDS 6800 (from pool store)
My question is is this correct? Is there anyway to verify? Suggestions? The fill water they have to use here is well water trucked in because of drought conditions. The ground water here is known for its hardness. The water is beautiful, the CSI stays around -.09 on the intellichem, and I have to add about 12-16 oz a day of acid.
Thanks
Edited: for Salt and TDS