Which do you recommend? I checked eBay and they have few of them. Which one is best?
I have one right now. And either I do something wrong or it just don't work. I connect it and place it in the pool and it won't move.Have you considered a suction side "crawley" type? I'm not a fan of 'robot' vacuums. Too many parts inside that go bad and break.
I understand. But I thought something with wheels will be betterI'm sorry to be blunt, but to be honest and not pull the wool over your eyes, you just won't get much Robot for 300 dollars. A good friend gave me the best advice on this, and it is that when it comes to Robots especially, $$$ equal cleaning power. I also imagine that cheaper ones are much more prone to breakage.
I think Robotic cleaners are the future even after having one a short time. I cannot imagine that there is a better technology available to the pool owner in terms of cleaners at this time. I have a very dusty windy environment where I live and this thing has been a life saver. I doubt seriously there will be many times where I actually vacuum the pool.
I did what you said and it is clicking but it just won't move.You need to close the main drains and just draw from the skimmer. You will hear a "clicking" noise and see it start to move. Make sure it's flat on the bottom.
Looks good but little bit over my budget. I see that MX6 is about $280 but have only one cleaning port.I bought a zodiac barracuda mx8 a couple of years ago, and I love it. I leave it running for about 3 hours and it does 90% of the pool, I go and vacuum the other 10. As for steps, it won't do them, so I brush them before I put the robot in. I have an IG, I don't know if it will work on an AG, I don't know if that matters.