Hey folks,
Ive been a long time user of the poolfrog and have seen the light and converted over to the TFPM. I ordered the TF-100 and got the following on my 1st test
FC - 8
CC - 0.5
CH - 125
TA - 30
CYA- 70
PH - 6.8 (maybe less)
24ft round above ground Vinyl liner , sand filter... That gets a TON of direct sunlight
I used the pool Calculator and added in half (about 50 oz by volume) of the recommended dosage of Baking Soda this evening and plan on retesting the TA and PH tomorrow.
I uncovered and filled the pool today. There was some debris settled at the bottom that I vacuumed out. Still some of it stirred up and more settled at the bottom as you can see in the pic
Am I on the right track?
Once my numbers are within range, How often do I need to test? Daily ? Every other Day?
Any help or suggestions is greatly appreciated!
Ive been a long time user of the poolfrog and have seen the light and converted over to the TFPM. I ordered the TF-100 and got the following on my 1st test
FC - 8
CC - 0.5
CH - 125
TA - 30
CYA- 70
PH - 6.8 (maybe less)
24ft round above ground Vinyl liner , sand filter... That gets a TON of direct sunlight
I used the pool Calculator and added in half (about 50 oz by volume) of the recommended dosage of Baking Soda this evening and plan on retesting the TA and PH tomorrow.
I uncovered and filled the pool today. There was some debris settled at the bottom that I vacuumed out. Still some of it stirred up and more settled at the bottom as you can see in the pic
Am I on the right track?
Once my numbers are within range, How often do I need to test? Daily ? Every other Day?
Any help or suggestions is greatly appreciated!