We just had our fiberglass pool installed. We haven't even begun to use it but everything is now completed including concrete decking. Yesterday while cleaning and scrubbing the sides we noted 2 cracks. We immediately contacted our pool builder and sent photos. The first reply was basically that the "marks" (they referred to them as marks when they are cracks) were caused by the mold?? We do not buy this and replied that they are cracks where you can feel a popped out edge when running your finger over the cracks. He said they could re-gel coat it but the color may not match. I replied that any unsightly repair on a brand new pool is not an option. The other company owner then replied that a gel coat crack is an easy fix and said you just sand, gel coat and buff. They are saying it is not structural. They also said if I purchased tiles the epoxy would seal the cracks and the tiles would cover them.
We do not want to spend more money to fix a problem that shouldn't even be there. I am very distraught over the whole situation. I don't know why the cracks are there and I don't want an ugly fix or an inadequate fix.
The pool is a Leisure brand, Riviera 34'. They did a 3/8" gravel bed, back filled while filling with water, leveled it several times. I just don't know what happened to cause these cracks. I also don't want anything done that would void our warranty with Leisure.
Here are the cracks- any thoughts? Advice?
And close up of 2nd crack
We do not want to spend more money to fix a problem that shouldn't even be there. I am very distraught over the whole situation. I don't know why the cracks are there and I don't want an ugly fix or an inadequate fix.
The pool is a Leisure brand, Riviera 34'. They did a 3/8" gravel bed, back filled while filling with water, leveled it several times. I just don't know what happened to cause these cracks. I also don't want anything done that would void our warranty with Leisure.
Here are the cracks- any thoughts? Advice?
And close up of 2nd crack